Junio C Hamano [Wed, 5 Jul 2017 20:32:57 +0000 (13:32 -0700)]
Merge branch 'cc/shared-index-permfix'
The split index code did not honor core.sharedrepository setting
correctly.
* cc/shared-index-permfix:
t1700: make sure split-index respects core.sharedrepository
t1301: move modebits() to test-lib-functions.sh
read-cache: use shared perms when writing shared index
Junio C Hamano [Wed, 5 Jul 2017 20:32:56 +0000 (13:32 -0700)]
Merge branch 'rs/sha1-name-readdir-optim'
Optimize "what are the object names already taken in an alternate
object database?" query that is used to derive the length of prefix
an object name is uniquely abbreviated to.
* rs/sha1-name-readdir-optim:
sha1_file: guard against invalid loose subdirectory numbers
sha1_file: let for_each_file_in_obj_subdir() handle subdir names
p4205: add perf test script for pretty log formats
sha1_name: cache readdir(3) results in find_short_object_filename()
Junio C Hamano [Wed, 5 Jul 2017 20:32:55 +0000 (13:32 -0700)]
Merge branch 'bw/repo-object'
Introduce a "repository" object to eventually make it easier to
work in multiple repositories (the primary focus is to work with
the superproject and its submodules) in a single process.
* bw/repo-object:
ls-files: use repository object
repository: enable initialization of submodules
submodule: convert is_submodule_initialized to work on a repository
submodule: add repo_read_gitmodules
submodule-config: store the_submodule_cache in the_repository
repository: add index_state to struct repo
config: read config from a repository object
path: add repo_worktree_path and strbuf_repo_worktree_path
path: add repo_git_path and strbuf_repo_git_path
path: worktree_git_path() should not use file relocation
path: convert do_git_path to take a 'struct repository'
path: convert strbuf_git_common_path to take a 'struct repository'
path: always pass in commondir to update_common_dir
path: create path.h
environment: store worktree in the_repository
environment: place key repository state in the_repository
repository: introduce the repository object
environment: remove namespace_len variable
setup: add comment indicating a hack
setup: don't perform lazy initialization of repository state
Junio C Hamano [Fri, 30 Jun 2017 20:45:22 +0000 (13:45 -0700)]
Merge branch 'ks/status-initial-commit'
"git status" has long shown essentially the same message as "git
commit"; the message it gives while preparing for the root commit,
i.e. "Initial commit", was hard to understand for some new users.
Now it says "No commits yet" to stress more on the current status
(rather than the commit the user is preparing for, which is more in
line with the focus of "git commit").
* ks/status-initial-commit:
status: contextually notify user about an initial commit
Junio C Hamano [Fri, 30 Jun 2017 20:45:21 +0000 (13:45 -0700)]
Merge branch 'ab/die-errors-in-threaded'
Traditionally, the default die() routine had a code to prevent it
from getting called multiple times, which interacted badly when a
threaded program used it (one downside is that the real error may
be hidden and instead the only error message given to the user may
end up being "die recursion detected", which is not very useful).
* ab/die-errors-in-threaded:
die(): stop hiding errors due to overzealous recursion guard
Junio C Hamano [Fri, 30 Jun 2017 20:45:21 +0000 (13:45 -0700)]
Merge branch 'pw/rebase-i-regression-fix-tests'
Fix a recent regression to "git rebase -i" and add tests that would
have caught it and others.
* pw/rebase-i-regression-fix-tests:
t3420: fix under GETTEXT_POISON build
rebase: add more regression tests for console output
rebase: add regression tests for console output
rebase -i: add test for reflog message
sequencer: print autostash messages to stderr
René Scharfe [Tue, 27 Jun 2017 17:03:39 +0000 (19:03 +0200)]
apply: check git diffs for mutually exclusive header lines
A file can either be added, removed, copied, or renamed, but no two of
these actions can be done by the same patch. Some of these combinations
provoke error messages due to missing file names, and some are only
caught by an assertion. Check git patches already as they are parsed
and report conflicting lines on sight.
Found by Vegard Nossum using AFL.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Tue, 27 Jun 2017 17:03:47 +0000 (19:03 +0200)]
apply: check git diffs for invalid file modes
An empty string as mode specification is accepted silently by git apply,
as Vegard Nossum found out using AFL. It's interpreted as zero. Reject
such bogus file modes, and only accept ones consisting exclusively of
octal digits.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Tue, 27 Jun 2017 17:03:30 +0000 (19:03 +0200)]
apply: check git diffs for missing old filenames
2c93286a (fix "git apply --index ..." not to deref NULL) added a check
for git patches missing a +++ line, preventing a segfault. Check for
missing --- lines as well, and add a test for each case.
Found by Vegard Nossum using AFL.
Original-patch-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 26 Jun 2017 21:09:31 +0000 (14:09 -0700)]
Merge branch 'jk/add-p-commentchar-fix'
"git add -p" were updated in 2.12 timeframe to cope with custom
core.commentchar but the implementation was buggy and a
metacharacter like $ and * did not work.
The preceding bitmap entries have a 1-byte XOR-offset and 1-byte flags,
so their size is not a multiple of 4. Thus the name-hash cache is only
guaranteed to be 2-byte aligned and so we must use get_be32 rather than
indexing the array directly.
Signed-off-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Thu, 22 Jun 2017 00:40:24 +0000 (17:40 -0700)]
sha1_file: refactor has_sha1_file_with_flags
has_sha1_file_with_flags() implements many mechanisms in common with
sha1_object_info_extended(). Make has_sha1_file_with_flags() a
convenience function for sha1_object_info_extended() instead.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Thu, 22 Jun 2017 00:40:23 +0000 (17:40 -0700)]
sha1_file: do not access pack if unneeded
Currently, regardless of the contents of the "struct object_info" passed
to sha1_object_info_extended(), that function always accesses the
packfile whenever it returns information about a packed object, since it
needs to populate "u.packed".
Add the ability to pass NULL, and use NULL-ness of the argument to
activate an optimization in which sha1_object_info_extended() does not
needlessly access the packfile. A subsequent patch will make use of this
optimization.
A similar optimization is not made for the cached and loose cases as it
would not cause a significant performance improvement.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Thu, 22 Jun 2017 00:40:22 +0000 (17:40 -0700)]
sha1_file: teach sha1_object_info_extended more flags
Improve sha1_object_info_extended() by supporting additional
flags. This allows has_sha1_file_with_flags() to be modified to use
sha1_object_info_extended() in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Sun, 25 Jun 2017 04:34:29 +0000 (06:34 +0200)]
t1700: make sure split-index respects core.sharedrepository
Add a few tests to check that both the split-index file and the
shared-index file are created using the right permissions when
core.sharedrepository is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Sun, 25 Jun 2017 04:34:27 +0000 (06:34 +0200)]
read-cache: use shared perms when writing shared index
Since f6ecc62dbf (write_shared_index(): use tempfile module, 2015-08-10)
write_shared_index() has been using mks_tempfile() to create the
temporary file that will become the shared index.
But even before that, it looks like the functions used to create this
file didn't call adjust_shared_perm(), which means that the shared
index file has always been created with 600 permissions regardless
of the shared permission settings.
Because of that, on repositories created with `git init --shared=all`
and using the split index feature, one gets an error like:
Junio C Hamano [Sat, 24 Jun 2017 22:29:34 +0000 (15:29 -0700)]
Merge branch 'sg/revision-parser-skip-prefix' into maint
Code clean-up.
* sg/revision-parser-skip-prefix:
revision.c: use skip_prefix() in handle_revision_pseudo_opt()
revision.c: use skip_prefix() in handle_revision_opt()
revision.c: stricter parsing of '--early-output'
revision.c: stricter parsing of '--no-{min,max}-parents'
revision.h: turn rev_info.early_output back into an unsigned int
Junio C Hamano [Sat, 24 Jun 2017 22:29:28 +0000 (15:29 -0700)]
Merge branch 'jk/diff-blob' into maint
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
Junio C Hamano [Sat, 24 Jun 2017 22:29:27 +0000 (15:29 -0700)]
Merge branch 'jc/name-rev-lw-tag' into maint
"git describe --contains" penalized light-weight tags so much that
they were almost never considered. Instead, give them about the
same chance to be considered as an annotated tag that is the same
age as the underlying commit would.
* jc/name-rev-lw-tag:
name-rev: favor describing with tags and use committer date to tiebreak
name-rev: refactor logic to see if a new candidate is a better name
Junio C Hamano [Sat, 24 Jun 2017 21:28:41 +0000 (14:28 -0700)]
Merge branch 'ab/free-and-null'
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
Junio C Hamano [Sat, 24 Jun 2017 21:28:41 +0000 (14:28 -0700)]
Merge branch 'jk/warn-add-gitlink'
Using "git add d/i/r" when d/i/r is the top of the working tree of
a separate repository would create a gitlink in the index, which
would appear as a not-quite-initialized submodule to others. We
learned to give warnings when this happens.
* jk/warn-add-gitlink:
t: move "git add submodule" into test blocks
add: warn when adding an embedded repository
Junio C Hamano [Sat, 24 Jun 2017 21:28:40 +0000 (14:28 -0700)]
Merge branch 'bw/config-h'
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Junio C Hamano [Sat, 24 Jun 2017 21:28:40 +0000 (14:28 -0700)]
Merge branch 'bw/ls-files-sans-the-index'
Code clean-up.
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
Junio C Hamano [Sat, 24 Jun 2017 21:28:39 +0000 (14:28 -0700)]
Merge branch 'js/alias-early-config'
The code to pick up and execute command alias definition from the
configuration used to switch to the top of the working tree and
then come back when the expanded alias was executed, which was
unnecessarilyl complex. Attempt to simplify the logic by using the
early-config mechanism that does not chdir around.
* js/alias-early-config:
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
Junio C Hamano [Sat, 24 Jun 2017 21:28:38 +0000 (14:28 -0700)]
Merge branch 'rs/pretty-add-again'
The pretty-format specifiers like '%h', '%t', etc. had an
optimization that no longer works correctly. In preparation/hope
of getting it correctly implemented, first discard the optimization
that is broken.
* rs/pretty-add-again:
pretty: recalculate duplicate short hashes
Junio C Hamano [Sat, 24 Jun 2017 21:28:37 +0000 (14:28 -0700)]
Merge branch 'ab/wildmatch-glob-slash-test'
A new test to show the interaction between the pattern [^a-z]
(which matches '/') and a slash in a path has been added. The
pattern should not match the slash with "pathmatch", but should
with "wildmatch".
* ab/wildmatch-glob-slash-test:
wildmatch test: cover a blind spot in "/" matching
Andreas Heiduk [Sat, 24 Jun 2017 07:22:58 +0000 (09:22 +0200)]
doc: clarify syntax for %C(auto,...) in pretty formats
The manual correctly describes the syntax with `auto,` but the
trailing `,` is hard to spot in a terminal. The HTML format does not
have this problem. Adding an example helps both worlds.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 24 Jun 2017 14:09:39 +0000 (16:09 +0200)]
sha1_file: guard against invalid loose subdirectory numbers
Loose object subdirectories have hexadecimal names based on the first
byte of the hash of contained objects, thus their numerical
representation can range from 0 (0x00) to 255 (0xff). Change the type
of the corresponding variable in for_each_file_in_obj_subdir() and
associated callback functions to unsigned int and add a range check.
Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 24 Jun 2017 12:12:30 +0000 (14:12 +0200)]
sha1_file: let for_each_file_in_obj_subdir() handle subdir names
The function for_each_file_in_obj_subdir() takes a object subdirectory
number and expects the name of the same subdirectory to be included in
the path strbuf. Avoid this redundancy by letting the function append
the hexadecimal subdirectory name itself. This makes it a bit easier
and safer to use the function -- it becomes impossible to specify
different subdirectories in subdir_nr and path.
Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Thu, 22 Jun 2017 18:43:47 +0000 (11:43 -0700)]
repository: enable initialization of submodules
Introduce 'repo_submodule_init()' which performs initialization of a
'struct repository' as a submodule of another 'struct repository'.
The resulting submodule 'struct repository' can be in one of three states:
1. The submodule is initialized and has a worktree.
2. The submodule is initialized but does not have a worktree. This
would occur when the submodule's gitdir is present in the
superproject's 'gitdir/modules/' directory yet the submodule has not
been checked out in superproject's worktree.
3. The submodule remains uninitialized due to an error in the
initialization process or there is no matching submodule at the
provided path in the superproject.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Thu, 22 Jun 2017 18:43:46 +0000 (11:43 -0700)]
submodule: convert is_submodule_initialized to work on a repository
Convert 'is_submodule_initialized()' to take a repository object and
while we're at it, lets rename the function to 'is_submodule_active()'
and remove the NEEDSWORK comment.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Thu, 22 Jun 2017 18:43:44 +0000 (11:43 -0700)]
submodule-config: store the_submodule_cache in the_repository
Refactor how 'the_submodule_cache' is handled so that it can be stored
inside of a repository object. Also migrate 'the_submodule_cache' to be
stored in 'the_repository'.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Thu, 22 Jun 2017 18:43:42 +0000 (11:43 -0700)]
config: read config from a repository object
Teach the config machinery to read config information from a repository
object. This involves storing a 'struct config_set' inside the
repository object and adding a number of functions (repo_config*) to be
able to query a repository's config.
The current config API enables lazy-loading of the config. This means
that when 'git_config_get_int()' is called, if the_config_set hasn't
been populated yet, then it will be populated and properly initialized by
reading the necessary config files (system wide .gitconfig, user's home
.gitconfig, and the repository's config). To maintain this paradigm,
the new API to read from a repository object's config will also perform
this lazy-initialization.
Since both APIs (git_config_get* and repo_config_get*) have the same
semantics we can migrate the default config to be stored within
'the_repository' and just have the 'git_config_get*' family of functions
redirect to the 'repo_config_get*' functions.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Thu, 22 Jun 2017 18:43:41 +0000 (11:43 -0700)]
path: add repo_worktree_path and strbuf_repo_worktree_path
Introduce 'repo_worktree_path' and 'strbuf_repo_worktree_path' which
take a repository struct and constructs a path relative to the
repository's worktree.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Thu, 22 Jun 2017 18:43:39 +0000 (11:43 -0700)]
path: worktree_git_path() should not use file relocation
git_path is a convenience function that usually produces a string
$GIT_DIR/<path>. Since v2.5.0-rc0~143^2~35 (git_path(): be aware of
file relocation in $GIT_DIR, 2014-11-30), as a side benefit callers
get support for path relocation variables like $GIT_OBJECT_DIRECTORY:
- git_path("index") is $GIT_INDEX_FILE when set
- git_path("info/grafts") is $GIT_GRAFTS_FILE when set
- git_path("objects/<foo>") is $GIT_OBJECT_DIRECTORY/<foo> when set
- git_path("hooks/<foo>") is <foo> under core.hookspath when set
- git_path("refs/<foo>") etc (see path.c::common_list) is relative
to $GIT_COMMON_DIR instead of $GIT_DIR
worktree_git_path, by comparison, is designed to resolve files in a
specific worktree's git dir. Unfortunately, it shares code with
git_path and performs the same relocation. The result is that paths
that are meant to be relative to the specified worktree's git dir end
up replaced by paths from environment variables within the current git
dir.
Luckily, no current callers pass such arguments. The relocation was
noticed when testing the result of merging two patches under review,
one of which introduces a caller:
* The first patch made git prune check the index file in each
worktree's git dir (using worktree_git_path(wt, "index")) for
objects not to prune. This would trigger the unwanted relocation
when GIT_INDEX_FILE is set, causing objects reachable from the
index to be pruned.
* The second patch simplified the relocation logic for index,
info/grafts, objects, and hooks to happen unconditionally instead of
based on whether environment or configuration variables are set.
This caused the relocation to trigger even when GIT_INDEX_FILE is
not set.
[jn: rewrote commit message; skipping all relocation instead of just
GIT_INDEX_FILE]
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Thu, 22 Jun 2017 18:43:36 +0000 (11:43 -0700)]
path: always pass in commondir to update_common_dir
Instead of passing in 'NULL' and having 'update_common_dir()' query for
the commondir, have the callers of 'update_common_dir()' be responsible
for providing the commondir.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Thu, 22 Jun 2017 18:43:35 +0000 (11:43 -0700)]
path: create path.h
Move all path related declarations from cache.h to a new path.h header
file. This makes cache.h smaller and makes it easier to add new path
related functions.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Thu, 22 Jun 2017 18:43:32 +0000 (11:43 -0700)]
repository: introduce the repository object
Introduce the repository object 'struct repository' which can be used to
hold all state pertaining to a git repository.
Some of the benefits of object-ifying a repository are:
1. Make the code base more readable and easier to reason about.
2. Allow for working on multiple repositories, specifically
submodules, within the same process. Currently the process for
working on a submodule involves setting up an argv_array of options
for a particular command and then launching a child process to
execute the command in the context of the submodule. This is
clunky and can require lots of little hacks in order to ensure
correctness. Ideally it would be nice to simply pass a repository
and an options struct to a command.
3. Eliminating reliance on global state will make it easier to
enable the use of threading to improve performance.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Tue, 20 Jun 2017 19:19:33 +0000 (12:19 -0700)]
setup: add comment indicating a hack
'GIT_TOPLEVEL_PREFIX_ENVIRONMENT' was added in (b58a68c1c setup: allow
for prefix to be passed to git commands) to aid in fixing a bug where
'ls-files' and 'grep' were not able to properly recurse when called from
within a subdirectory. Add a 'NEEDSWORK' comment indicating that this
envvar should be removed once 'ls-files' and 'grep' can recurse
in-process.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Tue, 20 Jun 2017 19:19:32 +0000 (12:19 -0700)]
setup: don't perform lazy initialization of repository state
Under some circumstances (bogus GIT_DIR value or the discovered gitdir
is '.git') 'setup_git_directory()' won't initialize key repository
state. This leads to inconsistent state after running the setup code.
To account for this inconsistent state, lazy initialization is done once
a caller asks for the repository's gitdir or some other piece of
repository state. This is confusing and can be error prone.
Instead let's tighten the expected outcome of 'setup_git_directory()'
and ensure that it initializes repository state in all cases that would
have been handled by lazy initialization.
This also lets us drop the requirement to have 'have_git_dir()' check if
the environment variable GIT_DIR was set as that will be handled by the
end of the setup code.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 21 Jun 2017 22:20:44 +0000 (15:20 -0700)]
Merge branches 'bw/ls-files-sans-the-index' and 'bw/config-h' into bw/repo-object
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
Junio C Hamano [Fri, 23 Jun 2017 18:56:25 +0000 (11:56 -0700)]
t3420: fix under GETTEXT_POISON build
Newly added tests to t3420 in this series prepare expected
human-readable output from "git rebase -i" and then compare the
actual output with it. As the output from the command is designed
to go through i18n/l10n, we need to use test_i18ncmp to tell
GETTEXT_POISON build that it is OK the output does not match.
Junio C Hamano [Thu, 22 Jun 2017 21:15:25 +0000 (14:15 -0700)]
Merge branch 'rs/strbuf-addftime-zZ'
As there is no portable way to pass timezone information to
strftime, some output format from "git log" and friends are
impossible to produce. Teach our own strbuf_addftime to replace %z
and %Z with caller-supplied values to help working around this.
* rs/strbuf-addftime-zZ:
date: use localtime() for "-local" time formats
t0006: check --date=format zone offsets
strbuf: let strbuf_addftime handle %z and %Z itself
Junio C Hamano [Thu, 22 Jun 2017 21:15:23 +0000 (14:15 -0700)]
Merge branch 'sg/revision-parser-skip-prefix'
Code clean-up.
* sg/revision-parser-skip-prefix:
revision.c: use skip_prefix() in handle_revision_pseudo_opt()
revision.c: use skip_prefix() in handle_revision_opt()
revision.c: stricter parsing of '--early-output'
revision.c: stricter parsing of '--no-{min,max}-parents'
revision.h: turn rev_info.early_output back into an unsigned int
git / git.git / log